home
about
news
sponsors
car
team
contact
 
Current vehicle

We are currently building a new vehicle for the Baja SAE Carolina 2010 competition. Our all-new design draws on the successful aspects of last year's car as well as lessons learned at the 2009 competition. Compared to last year's design, this car will have better rollover resistance, more predictable handling, a tighter turning radius, and more robust drivetrain components.

Specifications

Drivetrain
EngineBriggs and Stratton 1-cylinder OHV, air-cooled
TransmissionCVTech continuously variable
Final driveDana H-12 transaxle
Max power9.1 hp
Max torque13.8 ft-lb
Idle1750 rpm
Max rpm3800 rpm
High ratio5.7 : 1
Low ratio39.75 : 1
Max velocity34 mph
Max grade52%
Tire diameter22 in
Weight120 lb
Frame
Primary material1.25" carbon steel tubing
Secondary material1" carbon steel tubing
Length81.5 in
Width30.25 in
Height51.8 in
Weight100 lb
Suspension
DesignDouble-wishbone
Travel10" front, 10" rear
Camber5° front, 0° rear
Roll center height3" front, 0" rear
Spring rate120 lb/in front, 140 lb/in rear
Weight50 lb
Steering
DesignRack and pinion
Turning radius10 ft
Rack and pinion travel4.75 in
Lock to lock1.5 turns
Ackerman angle39.55°
Vehicle
Curb weight500 lb
Wheelbase60 in
Track width55 in
Ground clearance10 in

Previous cars

#68 (2010)

 

Event Rank
Acceleration 61
Pulling 26
Suspension 57
Maneuverability 50
Endurance 57
Overall 56
 
#79 (2009)

The 2009 baja car was built for and competed in the Baja SAE Alabama 2009 event. The competition took place at Auburn University's National Center for Asphalt Technology in Opelika, Alabama. A total of 100 teams entered.

EventRank
Acceleration24
Pulling10
SuspensionDNF
Maneuverability61
Endurance39
Overall59
#62 (2006)

This car traveled to Alabama for the 2006 Mini Baja East competition, hosted by Auburn University. A total of 65 teams competed in the event.

EventRank
AccelerationDNF
Pulling28
SuspensionDNF
Land maneuverabilityDNF
Water maneuverabilityDNF
Endurance38
Overall37
#33 (2005)

This car competed in the 2005 Mini Baja West event, held at Caterpillar's Tinaja Hills Training Center in Green Valley, Arizona. There were 131 entries.

EventRank
AccelerationDNF
Rock crawlDNF
Hill climbDNF
ManeuverabilityDNF
EnduranceDNF
Overall112
#70 (2004)

This car competed in the 2004 Mini Baja Midwest competition, which was hosted by the Milwaukee Section of SAE International in Milwaukee, Wisconsin. This was a very large competition with 137 entries.

EventRank
Acceleration85
Top speed83
Pulling56
Hill climb96
Maneuverability85
EnduranceDNF
Overall97
#70 (2003)

This car competed in the 2003 Mini Baja Midwest event in Troy, Ohio, which was hosted by the Dayton Section of SAE International. A total of 122 teams entered the competition.

EventRank
Acceleration111
Top speed65
Pulling23
Hill climb74
Maneuverability103
Endurance45
Overall67
#49 (2002)

This car traveled to Logan, Utah for the 2002 Mini Baja West event, hosted by Utah State University. There were 100 entries.

EventRank
Acceleration29
Hill climb44
Maneuverability40
Endurance30
Overall49

© 2008-10 TU Mini Baja